Home > Products > Signal and Monitoring >
eDAQ >
Software for Data Aquisition & Analysis
eDAQ supplies a variety of
transducers suitable for use with their e-corder
units, and their fully software-controlled Amp and
Pods:
| |
|
|
|
Chart & Scope
Use Chart software if you have previously
worked with chart recorders or flat-bed
plotters. Data is recorded in a series of
adjacent blocks, within the one file, as
you start and stop recording. You can scroll
backwards or forwards through the blocks
to review your data. Use Scope software
if you have previously worked with XY or
XYT plotters, or oscilloscopes. Data is
recorded in a series of sweeps (or 'pages'
) within the one file. These sweeps can
be overlaid to compare results from one
sweep to the next. You can even average
the signal from successive sweeps to increase
signal-to-noise levels.
Both programs can graphically display data
in a number of ways: use the Zoom Window
to expand a selection of data; overlay data
from different channels; or use XY plotting
to graph the data on one channel versus
the data on a second channel.
|
| |
PowerChrom® Software
PowerChrom software
runs on Windows or Macintosh computers for
the collection, display and analysis of
chromatographic data. PowerChrom
is supplied as part of the PowerChrom systems,
or separately for use with e-corder recording
systems. Signals can be recorded from one
or two chromatography detectors. Most detectors
that have a "recorder" or "integrator"
output are suitable.
|
| |
EChem™ Software
eDAQ EChem software runs on Windows
or Macintosh computers for the collection,
display and analysis of data from electroanalytical
voltammetric experiments. EChem is used
with a suitable potentiostat and an e-corder
data recording system. The potentiostat
should have an 'external input' and current
and potential recorder outputs. Most analog
potentiostats are suitable.
EChem is also fully compatible with the
eDAQ Potentiostat, the high sensitivity
eDAQ Picostat and the four-channel eDAQ
QuadStat.
EChem uses the e-corder recording systems
as the digital waveform generator, and data
acquisition system. Thus even non-scanning
potentiostats can be upgraded to the full
range of EChem techniques.
EChem version 2 has improved resolution
(16 bit sampling, with 32 bit floating point
averaging), and faster scan rates (to about
500 V/s) than earlier versions.
|
| |
Chart Extentions
Chart extensions are small software plug-ins
that add extra features to the Chart software.
New extensions are continually being developed,
and the following list is regularly updated.
Examples of Chart Extension software available
are:
- Absorbance
- Amplitude Histogram
- Baseline Adjust
- Curve Fit
- Event Manager
- Export IGOR
- Export MATLAB
- Export QuickTime
- Export WAV
- FIA (Flow Injection Analysis)
- Function Generator
- Multipoint Calibration
- Peak Parameters
- pH Calibration
- Play Sound
- RMS & Noise
- Savitzky-Golay
- Shift
- STM
- Template
- Thermocouple
- Translate Binary
- XY Plot
|
For more information regarding the products above, CONTACT US
To select another eDAQ Product, CLICK HERE
To go back to Signal and Monitoring page, CLICK HERE
|
