Home > Products > Photonics > Kinetics Systems > Optical Table Accessories
KINETIC SYSTEMS produces "World Class" Vibration Isolation Products (or Vibration Control Products) to provide vibration-free work environments for users and manufacturers of sensitive equipment. Our Vibration Isolation Products, Optical Tables and Accessories literally set the standard for quality and performance.
| |
|
|
Get your instrumentation off the work surface. 23" deep shelf supports up to 400 lbs. and can be ordered with UL-approved lighting, electrical outlets, and additional shelves (electrical options US only). Ideal for power supplies, controllers, scopes, etc. Completely independent support won’t interfere with vibration isolation. |
|
For a draft-free or environmentally controlled atmosphere, add a tabletop enclosure constructed of durable acrylic. The 32" high enclosure has aluminum framework, a rigid composite roof, and 1/4" acrylic side and end panels. Side panels slide to provide easy access to the table from either side. Available with clear, amber, or smoke-gray colored panels. Optional HEPA filter blower can be mounted on top for a slightly positive air pressure.
|
|
Mount a large laser beneath the tabletop on this honeycomb mounting
shelf suspended from the bottom surface of the tabletop. The 2" thick honeycomb shelf is provided in two sizes: 15" x 48" and 15" x 68". If ordered at the same time as the tabletop, we will drill all required attaching holes.
|
|
|
An optional 2" diameter sleeved hole through the tabletop enables a laser beam to be directed to the work surface from a mounting shelf below the table. The laser port is normally located on the center line 5.5" from one end of the table and is bonded to the top and bottom table surfaces for durability. For other diameters, square, rectangular, or odd-shaped holes, submit a sketch for a quote
|
|
When joining tables, a butt splice is required for unobstructed top
surface and maximum rigidity. Two 3/4" thick, matched ground and pinned steel plates are used. One is precisely aligned and welded to the top and bottom surfaces. The second plate is attached with fasteners, the joining table is aligned with the first and the plate is welded to it. The tables are separated and packed for shipping. At installation, alignment and easy assembly are assured by matching up the locating pins. |
|
When an unobstructed tabletop is not an issue, a splice kit can be used
to join tables of the same thickness. The kit consists of a top plate
predrilled to match the tabletop hole pattern and two channels that are
bolted to the bottom surfaces with 1/4-20 holes (drilled and tapped by
the customer). A splice kit is ideal for field retrofitting two or
more tables.
|
|
For earthquake-prone areas, these retrofittable restraints will
withstand a 1g seismic load of 4000 lbs. maximum without a failure. No
contact between the table and restraint system during normal operation,
assuring vibration isolation performance is not degraded. |
|
This compact, fully-integrated air compressor is perfect for the
operation of several table systems in locations where a house
compressed air line is not available. Extremely quiet in operation (35
dB(A)/1 m), the PAC is complete with switch to maintain preset
pressure, accumulator tank, pressure regulator/filter, gauges, and
safety valve. |
For more information about the products above, CONTACT US
To select another Kinetics Systems Product, CLICK HERE
To go back to Photonics page, CLICK HERE
|
